Posted by Endulini on April 17, 2011, 4:26 pm
Hi,
I've been trying to replace a gate that's affected with rot (and has
interesting fungi growing on it) but have had difficulty locating a
replacement, can anyone tell me where I can buy an identical braced gate to
this:
http://www3.snapfish.co.uk/snapfishuk/thumbnailshare/AlbumID 639934010/a€94760010_8094760010/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfishuk/
I'm keen to get one the same as I quite like the look of it and was hoping
to simplify the hanging of the new one.
Thanks
Posted by Endulini on April 17, 2011, 4:33 pm
> Hi,
> I've been trying to replace a gate that's affected with rot (and has
> interesting fungi growing on it) but have had difficulty locating a
> replacement, can anyone tell me where I can buy an identical braced gate
> to this:
>
http://www3.snapfish.co.uk/snapfishuk/thumbnailshare/AlbumID 639934010/a€94760010_8094760010/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfishuk/
> I'm keen to get one the same as I quite like the look of it and was hoping
> to simplify the hanging of the new one.
> Thanks
Sorry, try this:
http://www3.snapfish.co.uk/snapfishuk/viewsharedphoto/p62171303072091629/l $29916010/g€94760010/cobrandOid07/campaignName=ShareeNewRegUK_30FreePrints_2010Feb/otsc=SYE/otsi=SPHN
Posted by Malcolm on April 17, 2011, 5:51 pm
On 17/04/2011 21:33, Endulini wrote:
>> Hi,
>>
>> I've been trying to replace a gate that's affected with rot (and has
>> interesting fungi growing on it) but have had difficulty locating a
>> replacement, can anyone tell me where I can buy an identical braced
>> gate to this:
>>
>>
http://www3.snapfish.co.uk/snapfishuk/thumbnailshare/AlbumID 639934010/a€94760010_8094760010/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfishuk/
>>
>>
>> I'm keen to get one the same as I quite like the look of it and was
>> hoping to simplify the hanging of the new one.
>>
>> Thanks
> Sorry, try this:
>
http://www3.snapfish.co.uk/snapfishuk/viewsharedphoto/p62171303072091629/l $29916010/g€94760010/cobrandOid07/campaignName=ShareeNewRegUK_30FreePrints_2010Feb/otsc=SYE/otsi=SPHN
Wickews used to do a kit to make a gate like this. You could make one
yourself using 100 * 19 T&G V jointed uprights and 75 * 25 for the
ledges and bracing.
Where are you - I am in S.E Hants and could help you
Malcolm
Posted by Jake on April 18, 2011, 3:47 am
>On 17/04/2011 21:33, Endulini wrote:
>>
>>> Hi,
>>>
>>> I've been trying to replace a gate that's affected with rot (and has
>>> interesting fungi growing on it) but have had difficulty locating a
>>> replacement, can anyone tell me where I can buy an identical braced
>>> gate to this:
>>>
>>>
http://www3.snapfish.co.uk/snapfishuk/thumbnailshare/AlbumID 639934010/a€94760010_8094760010/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfishuk/
>>>
>>>
>>> I'm keen to get one the same as I quite like the look of it and was
>>> hoping to simplify the hanging of the new one.
>>>
>>> Thanks
>> Sorry, try this:
>>
>>
http://www3.snapfish.co.uk/snapfishuk/viewsharedphoto/p62171303072091629/l $29916010/g€94760010/cobrandOid07/campaignName=ShareeNewRegUK_30FreePrints_2010Feb/otsc=SYE/otsi=SPHN
>>
>Wickews used to do a kit to make a gate like this. You could make one
>yourself using 100 * 19 T&G V jointed uprights and 75 * 25 for the
>ledges and bracing.
>Where are you - I am in S.E Hants and could help you
>Malcolm
Wickes still offer two gates like this - one is pre-assembled and 3
feet wide (code 187708) but there's also a kit form that has a max
width of 3ft 3ins but it's possible to vary the width quite easily
(code 187707). Their website is showing both as out of stock though.
Posted by Janet on April 18, 2011, 10:18 am
says...
>
>
> >On 17/04/2011 21:33, Endulini wrote:
> >>
> >>> Hi,
> >>>
> >>> I've been trying to replace a gate that's affected with rot (and has
> >>> interesting fungi growing on it) but have had difficulty locating a
> >>> replacement, can anyone tell me where I can buy an identical braced
> >>> gate to this:
> >>>
> >>>
http://www3.snapfish.co.uk/snapfishuk/thumbnailshare/AlbumID 639934010/a€94760010_8094760010/otsc=SHR/otsi=SALBlink/COBRAND_NAME=snapfishuk/
> >>>
> >>>
> >>> I'm keen to get one the same as I quite like the look of it and was
> >>> hoping to simplify the hanging of the new one.
> >>>
> >>> Thanks
> >> Sorry, try this:
> >>
> >>
http://www3.snapfish.co.uk/snapfishuk/viewsharedphoto/p62171303072091629/l $29916010/g€94760010/cobrandOid07/campaignName=ShareeNewRegUK_30FreePrints_2010Feb/otsc=SYE/otsi=SPHN
> >>
> >Wickews used to do a kit to make a gate like this. You could make one
> >yourself using 100 * 19 T&G V jointed uprights and 75 * 25 for the
> >ledges and bracing.
> >
> >Where are you - I am in S.E Hants and could help you
> >
> >Malcolm
>
> Wickes still offer two gates like this - one is pre-assembled and 3
> feet wide (code 187708) but there's also a kit form that has a max
> width of 3ft 3ins but it's possible to vary the width quite easily
> (code 187707). Their website is showing both as out of stock though.
Look in yellow pages for shed-makers, they will also make gates to
order. IME, their products are generally cheaper AND much better quality
than ready-made from chain outlets.
Janet
XML site map
> I've been trying to replace a gate that's affected with rot (and has
> interesting fungi growing on it) but have had difficulty locating a
> replacement, can anyone tell me where I can buy an identical braced gate
> to this:
>