Chainsaw blade replacement

 I've borrowed a petrol chainsaw and offered to replace the cutting chain as
part of the deal.
It is not one of the main brands.   Not done this before so is it just a
matter of getting a replacement chain the same length or is there something
else I need to look out for?

mark

 

ooops...meant this to go to DIY group.

mark

 
No problem, there are often chainsaw questions here too.

Most chainsaws use chains with similar drive tooth spacing so, yes,
it's usually just a chain with a specific number of links that you need.

However there *are* different types and sizes so I'd ask a chainsaw
specialist what's correct for your specific model of chainsaw.  What
make is it by the way?

I've used http://chainsawspecialists.co.uk  who are very helpful and
claim to be able to supply chains for *any* chainsaw.

--
Chris Green

 On Tue, 29 Mar 2011 15:24:35 +0100, "mark"


Rather than replacement, have you considered resharpening the existing
blade - it's more environment friendly and a lot cheaper. Most
chainsaw blades can be resharpened to "as good as new" state about 8
times.

Best place to start is finding a company near you that services lawn
mowers and the like - they'll usually handle the resharpening job as
well or will know someone who can. Worth a try at least.

Where I live, a local company will resharpen my chain for about £6
compared to about £19 for a new chain.

Jake

 
The company I recommended does sharpening, but it's a good idea to
have a spare chain (or two) so that when you're using the saw you can
just change the chain if it gets blunt and then sharpen them at
leisure later.

--
Chris Green