Posted by M K on March 29, 2006, 3:50 pm
I cannot find instructions on how to remove the casing but i have all the
Torx screws out of it and it seems like the clutch is the only thing to
remove. The problem i have is that i pulled the zip cord and it stayed and
never went back in. So im trying to avoid going to Home Depot and having
them send it out and costing me $35.00.
Any suggestions would be great or copy of a manual for this model.
Mark
ski_freakREMOVETHECAPS@yahoo.com
Posted by ds549 on March 29, 2006, 7:23 pm
i think there is a screw in the center of the clutch drum, where the
cable goes in.
http://www.minibite.com/america/malone.htm
Posted by KCnRichmond on March 30, 2006, 6:28 am
How much did it cost and how long have you had it? Less than 90 days and
under $100.00 they should replace it for you.. Check the return policy with
the retailer before buying power equipment at HD or Lowes. You will need
your receipt.
>i think there is a screw in the center of the clutch drum, where the
> cable goes in.
> http://www.minibite.com/america/malone.htm
>
Posted by JD on April 22, 2006, 9:31 pm
Dump it and put the money into a STIHL that will last.
JD
>I cannot find instructions on how to remove the casing but i have all the
>Torx screws out of it and it seems like the clutch is the only thing to
>remove. The problem i have is that i pulled the zip cord and it stayed and
>never went back in. So im trying to avoid going to Home Depot and having
>them send it out and costing me $35.00.
> Any suggestions would be great or copy of a manual for this model.
> Mark
> ski_freakREMOVETHECAPS@yahoo.com
>
XML site map
> cable goes in.
> http://www.minibite.com/america/malone.htm
>