Posted by Peter-Hardy on June 3, 2010, 11:21 am
Hey there.
Needing a little advice with my lawnmower.
Its a Countax purchased from LLoyds Ltd a few years back.
It has a B&S engine. 13.5hp. serial number - 28S777 1111 - E1 00031.
Chassis number - 00504 3B826 0551 A
The battery has gone to waste from being left in freezing conditions
over the
winter. The battery to replace is over £60 and would much
prefer a cheaper
solution to getting the mower going again.
The main question is - Can i purchase and fit a pull cord for the
engine? If so,
where can i get it?
Thanks all
--
Peter-Hardy
Posted by gardenlen on June 4, 2010, 12:48 pm
g'day peter,
not being familiar with teh model of mower but having some b&s
experience i would suggest you need to hunt around mower shops maybe
or look for online engine manual help to see if that model motor also
had a pull cord starter option, most b&s motors did. actually over
here even battery start models had pull cord starters fitted as
standard.
basically you need to be looking for a model engine that has the same
similar cowling/starter mechanism, and replace the current cowling and
or starter with that. it maybe that simple or more complex, but i'd be
talking to mower repair shops or the suppliers of b&s motors.
the model number for the engine should be stamped into the cowling
used to be near the exhaust.
keep us informed
On Thu, 3 Jun 2010 11:21:30 -0400, Peter-Hardy
snipped
--
Matthew 25:13 KJV
"Watch therefore, for ye know neither
the day nor the hour wherein the Son
of man cometh"
Mark 13:33 "Take ye heed, watch and pray:
for ye know not when the time is".
len
With peace and brightest of blessings,
"Be Content With What You Have And
May You Find Serenity and Tranquillity In
A World That You May Not Understand."
http://www.lensgarden.com.au/
XML site map