Posted by Loosecanon on November 23, 2009, 4:16 am
I have 43 acres/17 hectares about an hour north of Perth. About 10 years ago
planted about 200 wattles, some gums, casuarina's, weeping peppermints and a
few other things. I must have done something right as the local stuff grew
twice as high as they should. Some have encroached into the firebreaks and
they have a nice crop of veldt grass underneath. I have about 12 dead trees
to remove.
I have a Deutscher H26 it is wonderful on the weeds but this section I can't
get into with the lower tree branches most of which are dead. This is due to
a lack of light and some pruning done at the end of the branches at
firebreak time. My neighbour has a 3 sawblade affair that connects to
hydraulics on his dozer but they don't go back to the tree trunk like I
want. The other thing is the dozer can only do the perimeter
So I need a reliable chainsaw that will cut through the lower branches some
of which are 4 inches/100 mm thick. It will also need to remove the dead
trees which have trunks 8 inches/ 200 mm thick. Just want something gutsy
that I am not spending ages on a tree branch. Would prefer secondhand to
save on costs. I have a 16 inch Homelite chainsaw but it won't look at this!
I have had a McCulloch in the past but it was a crap model that needed parts
all the time. What would suit the job, something bigger like a 20 inch and
what make and model is a good one with spare parts still availabe? Oh
something that has fuel and oil that is easy to get at too. Any help would
be much appreciated :c)
Anyone know how to eliminate African Lovegrass?
Cheers
Rick
Posted by atec7 7 on November 23, 2009, 8:54 am
Loosecanon wrote:
> I have 43 acres/17 hectares about an hour north of Perth. About 10 years ago
> planted about 200 wattles, some gums, casuarina's, weeping peppermints and a
> few other things. I must have done something right as the local stuff grew
> twice as high as they should. Some have encroached into the firebreaks and
> they have a nice crop of veldt grass underneath. I have about 12 dead trees
> to remove.
>
> I have a Deutscher H26 it is wonderful on the weeds but this section I can't
> get into with the lower tree branches most of which are dead. This is due to
> a lack of light and some pruning done at the end of the branches at
> firebreak time. My neighbour has a 3 sawblade affair that connects to
> hydraulics on his dozer but they don't go back to the tree trunk like I
> want. The other thing is the dozer can only do the perimeter
>
> So I need a reliable chainsaw that will cut through the lower branches some
> of which are 4 inches/100 mm thick. It will also need to remove the dead
> trees which have trunks 8 inches/ 200 mm thick. Just want something gutsy
> that I am not spending ages on a tree branch. Would prefer secondhand to
> save on costs. I have a 16 inch Homelite chainsaw but it won't look at this!
> I have had a McCulloch in the past but it was a crap model that needed parts
> all the time. What would suit the job, something bigger like a 20 inch and
> what make and model is a good one with spare parts still availabe? Oh
> something that has fuel and oil that is easy to get at too. Any help would
> be much appreciated :c)
>
> Anyone know how to eliminate African Lovegrass?
>
> Cheers
>
> Rick
>
>
Stihl 090
if you are up to it
Posted by =?iso-8859-1?Q?Je=DFus?= on November 25, 2009, 4:24 am
loosecanon@iinet.net.au said...
:
:I have 43 acres/17 hectares about an hour north of Perth. About 10 years ago
:planted about 200 wattles, some gums, casuarina's, weeping peppermints and a
:few other things. I must have done something right as the local stuff grew
:twice as high as they should. Some have encroached into the firebreaks and
:they have a nice crop of veldt grass underneath. I have about 12 dead trees
:to remove.
:
:I have a Deutscher H26 it is wonderful on the weeds but this section I can't
:get into with the lower tree branches most of which are dead. This is due to
:a lack of light and some pruning done at the end of the branches at
:firebreak time. My neighbour has a 3 sawblade affair that connects to
:hydraulics on his dozer but they don't go back to the tree trunk like I
:want. The other thing is the dozer can only do the perimeter
:
:So I need a reliable chainsaw that will cut through the lower branches some
:of which are 4 inches/100 mm thick. It will also need to remove the dead
:trees which have trunks 8 inches/ 200 mm thick. Just want something gutsy
:that I am not spending ages on a tree branch. Would prefer secondhand to
:save on costs. I have a 16 inch Homelite chainsaw but it won't look at this!
:I have had a McCulloch in the past but it was a crap model that needed parts
:all the time. What would suit the job, something bigger like a 20 inch and
:what make and model is a good one with spare parts still availabe? Oh
:something that has fuel and oil that is easy to get at too. Any help would
:be much appreciated :c)
I'd recommend a small to medium sized Stihl.
Other brands such as McCulloch and Jonserad are not worth the trouble,
IMO. Not saying they're all bad - but some models are.
Same with Husqvarnas to a lesser extent.
Just get a Stihl and play it safe :)
Are you likely to need a chainsaw for bigger stuff in the future?
If so, maybe a Stihl 390 would do nicely, approx. 60cc engine and 20"
bar. These are approx. $1100 new, last time I checked.
Nothing wrong with a second hand Stihl - as long as you use common sense
and check for any damage, especially to the housing. If the housing is
cracked - walk away... it's uneconomic to replace, assuming it can't be
welded. I'd also check for the condition of the chain brake and the
choke/stop lever. Make sure it works smoothly. Parts are bloody
expensive for chain saws.
I picked up an old 038 Stihl as a backup saw on eBay for $100, so that
might be one place to keep an eye out for a cheap chainsaw.
Posted by Jonno on November 25, 2009, 5:46 am
> loosecanon@iinet.net.au said...
> :
> :I have 43 acres/17 hectares about an hour north of Perth. About 10 years
> ago
> :planted about 200 wattles, some gums, casuarina's, weeping peppermints
> and a
> :few other things. I must have done something right as the local stuff
> grew
> :twice as high as they should. Some have encroached into the firebreaks
> and
> :they have a nice crop of veldt grass underneath. I have about 12 dead
> trees
> :to remove.
> :
> :I have a Deutscher H26 it is wonderful on the weeds but this section I
> can't
> :get into with the lower tree branches most of which are dead. This is due
> to
> :a lack of light and some pruning done at the end of the branches at
> :firebreak time. My neighbour has a 3 sawblade affair that connects to
> :hydraulics on his dozer but they don't go back to the tree trunk like I
> :want. The other thing is the dozer can only do the perimeter
> :
> :So I need a reliable chainsaw that will cut through the lower branches
> some
> :of which are 4 inches/100 mm thick. It will also need to remove the dead
> :trees which have trunks 8 inches/ 200 mm thick. Just want something gutsy
> :that I am not spending ages on a tree branch. Would prefer secondhand to
> :save on costs. I have a 16 inch Homelite chainsaw but it won't look at
> this!
> :I have had a McCulloch in the past but it was a crap model that needed
> parts
> :all the time. What would suit the job, something bigger like a 20 inch
> and
> :what make and model is a good one with spare parts still availabe? Oh
> :something that has fuel and oil that is easy to get at too. Any help
> would
> :be much appreciated :c)
> I'd recommend a small to medium sized Stihl.
> Other brands such as McCulloch and Jonserad are not worth the trouble,
> IMO. Not saying they're all bad - but some models are.
> Same with Husqvarnas to a lesser extent.
> Just get a Stihl and play it safe :)
Yep You could kill for a Stihl (even with a stihl.) the best chansaw around.
Parts and service are next to none!
Correct clean fuel mixes are very important, as someone I know found out
when I fixed his.
> Are you likely to need a chainsaw for bigger stuff in the future?
> If so, maybe a Stihl 390 would do nicely, approx. 60cc engine and 20"
> bar. These are approx. $1100 new, last time I checked.
> Nothing wrong with a second hand Stihl - as long as you use common sense
> and check for any damage, especially to the housing. If the housing is
> cracked - walk away... it's uneconomic to replace, assuming it can't be
> welded. I'd also check for the condition of the chain brake and the
> choke/stop lever. Make sure it works smoothly. Parts are bloody
> expensive for chain saws.
> I picked up an old 038 Stihl as a backup saw on eBay for $100, so that
> might be one place to keep an eye out for a cheap chainsaw.
>
> planted about 200 wattles, some gums, casuarina's, weeping peppermints and a
> few other things. I must have done something right as the local stuff grew
> twice as high as they should. Some have encroached into the firebreaks and
> they have a nice crop of veldt grass underneath. I have about 12 dead trees
> to remove.
>
> I have a Deutscher H26 it is wonderful on the weeds but this section I can't
> get into with the lower tree branches most of which are dead. This is due to
> a lack of light and some pruning done at the end of the branches at
> firebreak time. My neighbour has a 3 sawblade affair that connects to
> hydraulics on his dozer but they don't go back to the tree trunk like I
> want. The other thing is the dozer can only do the perimeter
>
> So I need a reliable chainsaw that will cut through the lower branches some
> of which are 4 inches/100 mm thick. It will also need to remove the dead
> trees which have trunks 8 inches/ 200 mm thick. Just want something gutsy
> that I am not spending ages on a tree branch. Would prefer secondhand to
> save on costs. I have a 16 inch Homelite chainsaw but it won't look at this!
> I have had a McCulloch in the past but it was a crap model that needed parts
> all the time. What would suit the job, something bigger like a 20 inch and
> what make and model is a good one with spare parts still availabe? Oh
> something that has fuel and oil that is easy to get at too. Any help would
> be much appreciated :c)
>
> Anyone know how to eliminate African Lovegrass?
>
> Cheers
>
> Rick
>
>