|
Posted by Bob on August 30, 2007, 6:56 am
If you were Registered and logged in, you could reply and use other advanced thread options
>I have not started my trimmer in about a month. There first pull
>or two it kicked once, but nothing since. The primer bulb appears
>to have a crack in it as it leaks gas when I push it. It is a
>Sthil FS-74.
>
> Any help?
Obviously, if the primer bulb is leaking, the engine won't get gas -
and usually this prevents the engine from running.
Replace the primer bulb - or better yet, take it to a shop & have it
replaced. The gas lines attatched to the primer bulb are usually
hardened and need replacing as well. Unless you are a very good DIY
guy, pay to have it done.
Bob-tx
|